LuftentfeuchtungAir Dehumidification


Alle Produkte der L-DCS Technology sind vollständig aus Polypropylen (PP) gefertigt und daher zu in hohem Maße Recycling fähig. Alle Anlagengehäuse sind sowohl für die Innenaufstellung als auch für Außenaufstellung verfügbar.

Luftentfeuchtung

Zur effektiven Frischluftentfeuchtung steht eine neue Generation von Austauschapparaten auf Basis der von L-DCS entwickelten, offenen Sorptionstechnik zur Verfügung. Dabei besteht eine Luftentfeuchtungsanlage aus der eigentlichen Entfeuchtereinheit, dem Absorber, einem Regenerator zur Aufbereitung der Salzlösung (Sorbens) und ggf. einem Verdunstungskühler als Rückkühlkomponente zum Abführen der bei der Luftentfeuchtung im Absorber frei gesetzten Wärme.

IEC_6-1-Kopie

Je nach Frischluftbedarf des Kunden werden individuell dimensionierte Luftentfeuchtungsapparate aus einzelnen, baugleichen Entfeuchtungsmodulen mit einer Luftkapazität von jeweils 2000m3Luft/h gefertigt.

Die Versorgung mit Salzlösung kann aus einem Sorbens-Vorratstank erfolgen, der, aufgrund der von L-DCS entwickelten Low-Flow© Technologie, als Energiespeicher mit einer Energiedichte von bis zu 280kWh/m3 dient. Durch entsprechende Auslegung der Energiespeicherkapazität kann eine verlustlose Energiespeicherung und der verlustlose Transport von Luftentfeuchtungsenergie gewährleistet werden.

Idealerweise werden diese Apparate mit einem entsprechenden L-DCS Verdunstungskühler zu einer Hochleistungs-Luftentfeuchtungsanlage kombiniert. Es ist dabei problemlos möglich örtliche Gegebenheiten in die Konfiguration einzubeziehen. So kann, wenn es das örtliche Klima zulässt, an Stelle des Verdunstungskühlers auch ein vorhandener Kühlturm, oder alternative Kühlquellen, wie Brunnenwasser, direkt zur Rückkühlung eingesetzt werden

All products of the L-DCS Technology are made entirely of polypropylene (PP) and can therefore to a large extent be recycled. All system housings are available for both indoor as well as for outdoor installation.

Dehumidification

L-DCS offer the latest generation of dehumidification systems based on open sorption processes. They consist of:

  • the actual dryer unit,
  • the absorber,
  • a regenerator for the preparation of the salt solution (sorbent) and optionally
  • an evaporative cooler as reflux cooling component for dissipating the heat released in the absorber during dehumidification.

IEC_6-1-Kopie

Depending on your fresh air requirement we individually size your L-DCS system in steps of 2000m3 air/h.

The supply of saline can be done from a sorbent storage tank. Due to the L-DCS low-flow© technology it can also be used as energy storage unit with a power density of up to 280kWh / m3. The clever design of the storage module allows also lossfree energy storage and transport of dehumidification energy.

Ideally, these devices are combined with a corresponding L-DCS evaporative cooler to a high-end dehumidification system. It is easily possible to adapt the configuration to local needs. If permitted by the local climate, instead of the evaporative cooler also an existing cooling tower, or alternative cooling sources such as well water, can be integrated directly for harvesting the cooling energy.